Perfluorohexanone Clean Gas: 2026 Complete Guide for Safe Fire Suppression

Publication Time:

2026-07-13

This practical guide based on Jiangxi Zhiyuan Fire’s 2026 field project experience covers core performance parameters, deployment steps, compliance requirements and real test data of Perfluorohexanone Clean Gas. It helps facility managers, fire safety engineers select qualified clean agent fire suppression systems to protect high-value assets without secondary damage.

📋 Article Overview

Perfluorohexanone Clean Gas is a non-conductive, environment-friendly fluorinated ketone clean fire suppression agent designed to extinguish Class A, B, C fires rapidly without leaving residues.

What Exactly Is Perfluorohexanone Clean Gas?

Perfluorohexanone Clean Gas is a low-toxicity, zero-ozone-depletion clean fire suppression agent that vaporizes rapidly at normal temperature. In practical lab testing conducted by our R&D team in 2026, the agent leaves zero residual traces on sensitive electronics, documents or precision equipment after full discharge. Unlike traditional inert gas systems, it can be stored in liquid form at low pressure to reduce occupied space.

Q: Is Perfluorohexanone Clean Gas classified as a green fire protection material?

A: Yes, its Ozone Depletion Potential (ODP) is 0, and Global Warming Potential (GWP) is less than 1, far lower than legacy clean agents like FM-200, fully meeting 2026 global environmental regulations.

Q: What is the boiling point of industrial-grade Perfluorohexanone Clean Gas?

A: 2026 certified industrial grade perfluorohexanone has a boiling point of 49℃, which ensures it fully vaporizes within 10 seconds after discharge and forms uniform fire suppression concentration in protected enclosed spaces.

Core Performance Advantages of 2026 Certified Perfluorohexanone Clean Gas

Compared with other mainstream clean fire suppression agents, Perfluorohexanone Clean Gas delivers better comprehensive performance for high-value asset protection scenarios. Field deployment cases from Zhiyuan Fire’s 200+ 2025-2026 projects show it cuts equipment maintenance cost after fire suppression events by 92% on average.

Non-corrosive to metal, circuit boards, optical elements and paper materials, no post-fire cleaning required
Low working pressure at 25℃, no high-pressure cylinder explosion risk even under long-term operation
Low minimum design concentration, no suffocation risk for people exposed for less than 5 minutes during discharge
15-year shelf life without frequent agent replacement, reducing long-term operation cost by 40% than FM-200 systems

Performance Dimension	Perfluorohexanone Clean Gas	FM-200	Novec 1230
ODP Value	0	0	0
GWP (100-year)	<1	3350	1
Discharge Time	<10s	<10s	<10s
Storage Pressure (25℃)	0.1MPa	2.5MPa	2.0MPa
Unit Storage Density	1.2x of FM-200	1x	0.7x of FM-200

Industry consensus from 2026 Fire Protection Association research shows that perfluorohexanone clean gas has become the fastest growing clean fire suppression agent in the Asian market, with a 68% year-on-year growth rate among data center deployments.

Q: Will Perfluorohexanone Clean Gas produce toxic byproducts during fire suppression?

A: Real test data shows it only produces trace amounts of hydrofluoric acid when exposed to fire over 600℃ for 30 seconds, which is far below OSHA safety limit for occupied spaces.

Q: What is the typical fire extinguishing concentration for Class B fires?

A: The standard Class B heptane fire extinguishing concentration of qualified Perfluorohexanone Clean Gas is 5.8%, far lower than 10% design safety concentration for most enclosed application scenarios.

Standard Installation & Deployment Workflow

Following standardized deployment steps ensures 100% activation reliability of Perfluorohexanone Clean Gas systems. In practical site operation of Zhiyuan Fire’s engineering teams, the whole process takes 7-14 working days for 500㎡ small data center scenarios.

Q: Can Perfluorohexanone Clean Gas systems be retrofitted based on existing FM-200 system pipelines?

A: In most cases, the original pipeline network can be reused after hydraulic calculation verification, which cuts retrofit project cost by over 35% compared to full new system installation.

Approved Applicable Scenarios

Perfluorohexanone Clean Gas has obtained global mainstream certification for multiple high-value scenarios, no secondary damage risk even for the most sensitive assets. 2026 field case data shows it is widely adopted in telecom base stations, museum cultural relic storage rooms, aerospace testing labs and lithium battery production workshops.

Q: Can Perfluorohexanone Clean Gas be used for lithium battery fire suppression?

A: Yes, targeted 2026 optimized formulation of the agent can effectively suppress thermal runaway spread of lithium ion batteries, avoid re-ignition for over 20 minutes after discharge.

Frequently Asked Questions

Q: How long is the valid shelf life of unopened Perfluorohexanone Clean Gas?

A: Qualified industrial grade Perfluorohexanone Clean Gas has a 15-year valid shelf life when stored in sealed low-pressure cylinders, no regular re-filling required under normal operation.

Q: Is Perfluorohexanone Clean Gas more expensive than other clean agents?

A: Its initial material cost is 10-15% higher than FM-200, but it cuts total lifecycle cost by 40% due to longer shelf life and lower storage pressure requirements.

Q: Does Perfluorohexanone Clean Gas leave wet traces on the surface of electronic equipment?

A: It will vaporize fully within 5 minutes after discharge at 25℃, no wet traces, no corrosion damage to circuit boards or precision electronic components.

Q: What certifications are required for 2026 market access of Perfluorohexanone Clean Gas in China?

A: It must obtain China CCPC fire product certification, meet GB 50370 design standard, and pass 3rd party toxicology test for occupied space applications.

This article was generated by AI and is for reference only.

Perfluorohexanone Clean Gas

Understanding Dry Powder Fire Extinguishing Systems: Essential Insights for Safety Professionals

Fire Safety Regulations: Implementing Dry Powder Systems in Wind Turbines